Skip to main content

Repair your picture thumbnails in XBMC after moving them to a central repository

I recently migrated all of my thumbnails in XBMC Eden to a single share on my Synology NAS but had all sorts of grief afterwards with random missing thumbnails.

I finally got around to repairing the missing picture thumbs this evening and found that by simply renaming "\\xxx.xxx.xxx.xxx\Userdata\Database\Textures6.db" to "\\xxx.xxx.xxx.xxx\Userdata\Database\Textures6.old", this file is recreated and the picture thumbs will be regenerated.

P.S I tried regenerating the thumbs using the option menu in XBMC and this did not work.

Comments

Post a Comment

Popular posts from this blog

Using ESPEasy with Home Assistant via MQTT

Preface: I've just started playing around with Home Assistant on a Raspberry Pi and exploring the world of MQTT to control devices on the network. Learning curve is a bit steep but worth the effort as MQTT is very fast. The hardware and software tools I'm using are as follows: 2 x Sonoff relay units 2 x NodeMCU Boards ESPEasy firmware (must be version 121 or above as that contains the MQTT 'retain' flag option. Home Assistant software on Raspberry Pi2 MQTT Test Software: PC: MQTT.fx Android: MQTT Dashboard

My Notepad++ tricks when editing YAML files in Home Assistant

To comment out a whole section in one go: Highlight the text you want to comment out and use CTRL + Q. If you do this at the start of a line, it will only comment that line. CTRL + Q is toggle mode (comment on/off). CTRL + K will allow you to add multiple comments one after the other.

How to check what entities are filling up your Home Assistant database

If you use the Home Assistant MariaDB add-on, this tip will show you how to query the database so see what Home Assistant entity states are triggering the most, filling up your database. What were going to do: Install the phMyAdmin add-on for MariaDB. Query the MariaDB database. See what entity state changes have the most action. Paste the code below into the SQL query box:  select entity_id,count( * ) from states group by entity_id order by count ( * ) desc; And if you're using the internal home-assistant_v2.db instead, you can use the SQLite Web add-on to achieve the same thing.