Troublesome Dahua IP Camera access from OSX

If you're having trouble accessing your Dahua IP camera after recent Mac security updates to Safari, it might be worth trying a camera firmware update to resolve the issue?

This worked for me on two different cameras. The cameras I updated were both IPC-HDB3200C that were running 2.210.0001.0.R, build : 2013-05-17.

The firmware I used that fixed the blank screen issue on the iMAC's was General_IPC-HX3(2)XXX_Eng_P_V2.212.0000.0.R.20131206 which can be downloaded here.

Comments

Using ESPEasy with Home Assistant via MQTT

Preface: I've just started playing around with Home Assistant on a Raspberry Pi and exploring the world of MQTT to control devices on the network. Learning curve is a bit steep but worth the effort as MQTT is very fast. The hardware and software tools I'm using are as follows: 2 x Sonoff relay units 2 x NodeMCU Boards ESPEasy firmware (must be version 121 or above as that contains the MQTT 'retain' flag option. Home Assistant software on Raspberry Pi2 MQTT Test Software: PC: MQTT.fx Android: MQTT Dashboard

My Notepad++ tricks when editing YAML files in Home Assistant

To comment out a whole section in one go: Highlight the text you want to comment out and use CTRL + Q. If you do this at the start of a line, it will only comment that line. CTRL + Q is toggle mode (comment on/off). CTRL + K will allow you to add multiple comments one after the other.

Installing ha-bridge on your Raspberry Pi

EDIT: Updated 14th June 2017 to reflect version 4.5.5. Default port is now 80 to keep Google Home happy and service now supports MQTT! Advice on backups also added 7th Feb. Version 4x also supports adding a Home Assistant instance which is great! Want to control your Vera, Harmony hub or Home Assistant entities with your Amazon echo or Google Home? ha-bridge is the best way to achieve that and installation is actually quite easy and takes less than 5 minutes. Here are the steps.

XBMCNut

Search This Blog