Can't ping Kodi after being plugged into a wired network

Had this recently. Connected my Kodi 16 Raspberry Pi to a wired network once to download some updates then after unplugging, could not reach the Pi via Samba or SSH or even ping the device via wireless even though the device had an IP and it said it was connected..

Go to Programs > OpenELEC/LibreELEC Configuration and under Networks > Wired Networks, uncheck this button and reboot.

That worked for me.

Comments

Using ESPEasy with Home Assistant via MQTT

Preface: I've just started playing around with Home Assistant on a Raspberry Pi and exploring the world of MQTT to control devices on the network. Learning curve is a bit steep but worth the effort as MQTT is very fast. The hardware and software tools I'm using are as follows: 2 x Sonoff relay units 2 x NodeMCU Boards ESPEasy firmware (must be version 121 or above as that contains the MQTT 'retain' flag option. Home Assistant software on Raspberry Pi2 MQTT Test Software: PC: MQTT.fx Android: MQTT Dashboard

My Notepad++ tricks when editing YAML files in Home Assistant

To comment out a whole section in one go: Highlight the text you want to comment out and use CTRL + Q. If you do this at the start of a line, it will only comment that line. CTRL + Q is toggle mode (comment on/off). CTRL + K will allow you to add multiple comments one after the other.

Installing ha-bridge on your Raspberry Pi

EDIT: Updated 14th June 2017 to reflect version 4.5.5. Default port is now 80 to keep Google Home happy and service now supports MQTT! Advice on backups also added 7th Feb. Version 4x also supports adding a Home Assistant instance which is great! Want to control your Vera, Harmony hub or Home Assistant entities with your Amazon echo or Google Home? ha-bridge is the best way to achieve that and installation is actually quite easy and takes less than 5 minutes. Here are the steps.

XBMCNut

Search This Blog