Skip to main content

How to use the Synology Chat platform with Home Assistant

Get notifications and now images sent to your mobile from Home Assistant so you can keep an eye on your house. If you own a Synology NAS, this is a totally free notification option with no file limits. Awesome!

No Android smart watch support for Chat just yet but hopefully that is coming soon.
















An example script that uses the platform is shown below


      - service: notify.hass_synochat
        data:
          message: "Pool Gate was opened"
          data:
            file_url: http://ipaddressofhass:8123/local/images/pool_gate.jpg

N.B Ensure you turn off your phones battery optimisation feature for the Synology Chat app otherwise you won't get notifications coming through in near real time.

Buy your Synology NAS here.
Home Assistant Chat add-on here.
Info on the Synology Chat platform is here.

Comments

  1. Hi, I've saw your post for the CURL script. Do you've found a solution for the correct syntax? When I try to launch the command line from terminal I received "URL using bad/illegal format or missing URL".

    ReplyDelete
    Replies
    1. Could you please provide a link to the post you're referring to?

      Delete

Post a Comment

Popular posts from this blog

Using ESPEasy with Home Assistant via MQTT

Preface: I've just started playing around with Home Assistant on a Raspberry Pi and exploring the world of MQTT to control devices on the network. Learning curve is a bit steep but worth the effort as MQTT is very fast. The hardware and software tools I'm using are as follows: 2 x Sonoff relay units 2 x NodeMCU Boards ESPEasy firmware (must be version 121 or above as that contains the MQTT 'retain' flag option. Home Assistant software on Raspberry Pi2 MQTT Test Software: PC: MQTT.fx Android: MQTT Dashboard

My Notepad++ tricks when editing YAML files in Home Assistant

To comment out a whole section in one go: Highlight the text you want to comment out and use CTRL + Q. If you do this at the start of a line, it will only comment that line. CTRL + Q is toggle mode (comment on/off). CTRL + K will allow you to add multiple comments one after the other.

Installing ha-bridge on your Raspberry Pi

EDIT: Updated 14th June 2017 to reflect version 4.5.5. Default port is now 80 to keep Google Home happy and service now supports MQTT! Advice on backups also added 7th Feb. Version 4x also supports adding a Home Assistant instance which is great! Want to control your Vera, Harmony hub or Home Assistant entities with your Amazon echo or Google Home? ha-bridge is the best way to achieve that and installation is actually quite easy and takes less than 5 minutes. Here are the steps.